General parameter:

•  Pacing Modes:
  DDD,VDD,DDI,DVI,DOO,VVI,VVT,VOO,AAI,AAT,AOO,DDDR,VDDR,DDIR,DVIR,DOOR,VVIR,VOOR, VVTR, AAIR, AOOR, AATR, OAO, OVO, ODO, OFF
•  Basic Rate: From 30 BPM to 180 BPM in steps of 2 BPM.
•  Upper Sensor Rate  : From 80 BPM to 180 BPM in steps of 2 BPM.
•  Upper Tracking Rate: From 80 BPM to 180 BPM in steps of 2 BPM.(Behavior will be Wenckebach)
•  Minimized Ventricle Pacing.
•  A-Tachy Response.
•  Rate Smoothing in AT.
•  Safety Polarity Switch.
•  Magnet Response.
•  Noise Detection.
•  PVC/PMT Response and Ventricular safety pacing.
•  Non Competitive Atrial Pacing.
•  Rate Drop Response
•  Auto Measure
•  Night Low Rates.
•  AF Detection and suppression.
•  High Rate Temporary programming
•  MRI safe with Pacetronix MRI safe Leads.

Atrial Parameters:

•  Pulse Width: From 0.07 ms and  0.1 ms to 1.5 ms in steps of 0.1 ms.
•  Amplitude:  From 0.2 V to 7.5 V.
•  Pacing Polarity : Unipolar /Bipolar
•  Sensitivity: 0.2 mV  to  6.4 mV
•  Sensing Polarity: Unipolar/Bipolar
•  Refractory Period: From 200 ms to 500 ms in steps of  25 ms
•  PVARP : From 200 ms to 500 ms in steps of  25 ms

Ventricular Parameters:

•  Pulse Width: From 0.07 ms and 0.1 ms to 1.5 ms in steps of 0.1 ms.
•  Amplitude:  From 0.2 V to 7.5 V.
•  Pacing Polarity : Unipolar /Bipolar
•  Sensitivity: 0.5 mV to 16 mV
•  Sensing Polarity: Unipolar/Bipolar
•  Refractory Period: From 200 ms to 500 ms in steps of  25 ms
•  Blanking Period: 21,36 ,52, 68 ms

Left Ventricular Parameters:

•  Pulse Width: From 0.07 ms and 0.1 ms to 1.5 ms in steps of 0.1 ms.
•  Amplitude:  From 0.2 V to 7.5 V.
•  Pacing Polarity : Unipolar /Bipolar/ LV tip to RV ring
•  V-V delay: From 0 to 70 ms (step of 10 ms)
•  Option for RV First (Default LV  pulse first)

Hysteresis Parameter

•  Hysteresis Enable : On/Off
•  Hysteresis Rate Change : From 4 BPM to 60 BPM in steps of 4 BPM
•  Hysteresis Search: On/Off.

AV Delay Parameter 

•  Post Pacing AV Delay : From 20 ms to 350 ms in steps of 15 ms
•  Post Sensing AV Delay : From 20 ms to 350 ms in steps of 15 ms
•  AV hysteresis : From 10 ms to 70 ms in steps of 10 ms
•  AV Hysteresis Search: On/Off.

A-Tachy Parameters

•  Enable: On/Off 
•  A Trigger Rate: From 80 bpm to 180 bpm in steps of 2bpm
•  Number of events for A-Tachy Entry: 4, 8, 16, 32
•  Number of events for A-Tachy exit: 4, 8, 16, 32

Activity Parameters

•  Upper Activity Rate: From 80 BPM to 180 BPM in steps of 2 BPM
•  Activity Rate Response: From 1 to 15
•  Reaction Time: From 10 s to 60 s in steps of 10 s
•  Recovery Time: From 1 m to 10 m in steps of 1 m.
•  Automatic Refractory Change: On/Off. When programmed On, if the rate is greater than 120 BPM, the refractory switch to the minimum value between the programmed one and 250 ms.

Night Rate Parameters

•  Night Enable: On/Off.
•  Night Rate Switch Time : From 00:00 to 23:45 in steps of 15’
•  Day rate Switch Time : From 00:00 to 23:45 in steps of 15’
•  Night Rate : From 32 Bpm to 100 Bpm in steps of 2 bpm
•  Automatic Switch to day rate based on Activity : On/Off

Rate Drop Parameters:

•  Rate Drop –ON/OFF
•  Rate Drop Rate–80 to 144 BPM
•  Rate Drop Duration–30 to 240 beats (Step of 30 beats)
•  1^st detection Window–1 to 30 beats (Steps of 1 beat)
•  2^nd detection Window–1 to 7 beats (Steps of 1 beat)
•  Upper Limit–50 to 100 BPM
•  Lower Limit–40 to 80 BPM

 Diagnostics:

•  Pace/ Sens Counts
•  Noise count and Noise pacing counts.
•  Rate Histogram
•  AV conduction histogram.
•  High Rate Episodes.
•  A-Tachy counts.
•  Lead monitoring.
•  AT/AF Duration

 Magnetic Response:

• BOL: VOO/AOO/DOO mode. (In case of dual mode, the AV delay will be 95ms.) Rate 96 BPM.
• ERI: VOO/AOO/DOO mode. (In case of dual mode, the AV delay will be 110ms.) Rate 84 BPM.
• EOL: VOO/AOO. Rate 64 BPM

Battery Chemistry and Model:  Lithium Iodine Li3150 (1.28 Ah).

Initial Voltage: 2.8V.

Service Life: The expected life of the Pacemaker, pacing 100% at 70 bpm, DDD mode, with 2.5 V amplitude (A & V), pulse width of 0.4 ms and lead impedance 500 Ohms, is 8 Years.

Size: 49X42X8.5 mm

Mass: 30 gm